All of the following are typical components of a bid package except for ________.

A contract in which the contractor is paid according to the actual quantities of items used is called a ________ contract.

Which of the following is an example of workers’ compensation fraud?

A person who fails a qualifying electrical examination in the state of North Carolina with a score of 68 must wait __________ before being eligible to take another examination in the same classification.

When referring to adjustable-trip circuit breakers, restricted access can be defined as ______________.

Overcurrent devices shall be readily accessible and installed so that the center of the grip of the operating handle of the switch or circuit breaker is not more than ____________ above the floor or working platform.

Cord-and-plug connected vending machines rated 250 volts or less and 60 amperes or less shall be provided with ground-fault circuit-interrupter protection. The protection can be provided by the branch circuit overcurrent device, a device or outlet within the supply cord and not more than __________ from the attachment plug.

Adjustment factors for more than 3 current-carrying conductors installed in a raceway only apply when the raceway exceeds __________ in length.

Color coding shall be permitted to identify intrinsically safe conductors where they are colored ____________ and no other conductors are identified in the same manner.

What is the maximum number of 250 kcmil, XHHW conductors allowed in a 3 in. flexible metal conduit that is over 24 in. long?

Cable tray systems shall be permitted to support single conductors used as service entrance conductors in sizes __________ and larger that are listed for use in cable tray.

What is the minimum calculated branch circuit load for the lighting of a 6,700 ft.² church?

A metal raceway that is intended to be mounted to the surface of or suspended from a structure, with associated accessories for the installation of electrical conductors and cables is called a ____________.

Where independent support wires are used to support cables and raceways above suspended ceilings, the support wires _________________.

A location in which flammable gases or vapors are or may be present in the air in quantities sufficient to produce explosive or ignitable mixtures is classified as a ____________ location.

Outside feeder conductors on poles shall have a separation of not less than _____________ where not placed on racks or brackets.

Type SJ flexible cable is listed for ___________.

A disconnecting means of adequate capacity for at least _________ of the input required for the momentary rating or 100% of the input required for the long-time rating of X-ray equipment, whichever is greater, shall be provided in the supply circuit.

Cables and conductors for which of the following systems are allowed to be attached to a service mast?

Which of the following statements is/are true regarding grounded conductors?
I. Each grounded conductor shall terminate within a panelboard in an individual terminal.
II. Grounded conductors of circuits with parallel conductors shall be permitted to terminate in a single terminal within a panelboard if the terminal is identified for the application.

What is the minimum calculated feeder neutral load for a 4,350 watt electric clothes dryer installed in a dwelling unit?

What is the allowable ampacity of a 10 AWG, THHN, copper conductor?

Evaluate the following statement: All conductors of a multiwire branch circuit shall originate from the same panelboard.

Smoke or heat detectors are not required in small concealed spaces over rooms provided that any space in question does not exceed ___________ in area.

The total sound pressure level produced by combining the ambient sound pressure level with all audible fire alarm notification appliances operating shall not exceed __________ at the minimum hearing distance.