BooksBooks and Resources

This is the place to find all of the books needed for your exam and links to where they can be purchased. You can also find information about your exam and links to the governing body and testing agency. Classes4contractors.com LLC has partnered with amazon.com to provide you with the lowest cost and fastest shipping for all of your book needs.

__

Washington Electrician License info

»  All testing is administered by PSI Exam services www.psiexams.com or 1-800-733-9267.

[vc_row] [vc_column width=”1/2″]
Washington Master Electrician (General)

  • The test consists of 110 questions with 3 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
4 hours
Subject Area
Number of Questions
NEC 90 – Introduction
2
NEC 100-110 – General Requirements
4
NEC 200-225, 280-285 – Wiring & Protection
3
NEC 230 – Services
5
NEC 240 – Overcurrent Protection
7
NEC 250 – Grounding & Bonding
7
NEC 300-398 – Wiring Methods
5
NEC 400-427, 455-480 – Electrical Equipment
4
430-450 – Motors, HVAC, Generators & Transformers
5
NEC 490 – Equipment over 600 Volts
1
NEC 500-516 – Hazardous Locations
4
NEC 517-590 – Special Occupancies
5
NEC 600-695 Special Equipment
4
NEC 700-702 Emergency & Standby Systems
3
NEC 705-780 Special Conditions
2
NEC 800-830 Communication Systems
1
General Trade Knowledge & Theory
12
Total Questions
80
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20
Major Load Calculations (Section 3)
Time allowed for this section
2 hours
Subject Area
Number of Questions
Major Load Calculation
10
Total
10

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (Residential)

  • The test consists of 90 questions with 3 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
3 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
3
NEC 200-225, 280-285 – Wiring & Protection
3
NEC 230 – Services
4
NEC 240 – Overcurrent Protection
6
NEC 250 – Grounding & Bonding
6
NEC 300-398 – Wiring Methods
9
NEC 400-427, 455-480 – Electrical Equipment
3
430-450 – Motors, HVAC, Generators & Transformers
3
NEC 500-516 – Hazardous Locations
1
NEC 517-590 – Special Occupancies
2
NEC 600-695 Special Equipment
4
NEC 700-702 Emergency & Standby Systems
2
NEC 705-780 Special Conditions
2
NEC 800-830 Communication Systems
1
General Trade Knowledge & Theory
10
Total Questions
60
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20
Major Load Calculations (Section 3)
Time allowed for this section
2 hours
Subject Area
Number of Questions
Major Load Calculation
10
Total
10

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (Pump & Irrigation)

  • The test consists of 70 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
3 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
3
NEC 230 – Services
4
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
5
NEC 300-398 – Wiring Methods
7
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
6
NEC 490 – Equipment over 600 Volts
2
NEC 500-516 – Hazardous Locations
1
NEC 600-695 Special Equipment
1
NEC 705-780 Special Conditions
2
General Trade Knowledge & Theory
10
Total Questions
50
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (Domestic Pump)

  • The test consists of 54 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
4 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 200-225, 280-285 – Wiring & Protection
2
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
6
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
5
NEC 500-516 – Hazardous Locations
1
NEC 705-780 Special Conditions
1
General Trade Knowledge & Theory
7
Total Questions
34
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (Signs)

  • The test consists of 60 questions with 3 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
3 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 230 – Services
3
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
10
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
2
NEC 600-695 Special Equipment
6
General Trade Knowledge & Theory
5
Total Questions
40
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (Limited Energy)

  • The test consists of 70 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
2
NEC 100-110 – General Requirements
3
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
3
NEC 300-398 – Wiring Methods
8
NEC 400-427, 455-480 – Electrical Equipment
3
430-450 – Motors, HVAC, Generators & Transformers
2
NEC 500-516 – Hazardous Locations
3
NEC 600-695 Special Equipment
3
NEC 705-780 Special Conditions
6
NEC 800-830 Communication Systems
3
General Trade Knowledge & Theory
10
Total Questions
50
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (HVAC/R)

  • The test consists of 70 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
3 hours
Subject Area
Number of Questions
NEC 90 – Introduction
2
NEC 100-110 – General Requirements
3
NEC 200-225, 280-285 – Wiring & Protection
2
NEC 240 – Overcurrent Protection
5
NEC 250 – Grounding & Bonding
5
NEC 300-398 – Wiring Methods
6
NEC 400-427, 455-480 – Electrical Equipment
4
430-450 – Motors, HVAC, Generators & Transformers
8
NEC 490 – Equipment over 600 Volts
1
NEC 500-516 – Hazardous Locations
1
NEC 600-695 Special Equipment
1
NEC 705-780 Special Conditions
2
General Trade Knowledge & Theory
10
Total Questions
50
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (HVAC/R Restricted)

  • The test consists of 54 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
4 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
3
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
5
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
5
NEC 500-516 – Hazardous Locations
1
NEC 705-780 Special Conditions
3
General Trade Knowledge & Theory
6
Total Questions
34
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (Nonresidential Maintenance)

  • The test consists of 74 questions with 3 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
4 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
3
NEC 200-225, 280-285 – Wiring & Protection
2
NEC 230 – Services
2
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
8
NEC 400-427, 455-480 – Electrical Equipment
4
430-450 – Motors, HVAC, Generators & Transformers
4
NEC 490 – Equipment over 600 Volts
2
NEC 500-516 – Hazardous Locations
3
NEC 517-590 – Special Occupancies
2
NEC 600-695 Special Equipment
3
NEC 700-702 Emergency & Standby Systems
3
NEC 705-780 Special Conditions
2
NEC 800-830 Communication Systems
1
General Trade Knowledge & Theory
6
Total Questions
54
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (Nonresidential Lighting Maintenance & Lighting Retrofit)

  • The test consists of 40 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
4 hours
Subject Area
Number of Questions
NEC 90 – Introduction
2
NEC 100-110 – General Requirements
2
NEC 240 – Overcurrent Protection
2
NEC 250 – Grounding & Bonding
3
NEC 400-427, 455-480 – Electrical Equipment
5
NEC 500-516 – Hazardous Locations
1
General Trade Knowledge & Theory
5
Total Questions
20
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (Residential Maintenance)

  • The test consists of 54 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
2
NEC 100-110 – General Requirements
3
NEC 200-225, 280-285 – Wiring & Protection
2
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
3
NEC 400-427, 455-480 – Electrical Equipment
3
430-450 – Motors, HVAC, Generators & Transformers
3
NEC 600-695 Special Equipment
3
NEC 700-702 Emergency & Standby Systems
2
NEC 705-780 Special Conditions
1
General Trade Knowledge & Theory
5
Total Questions
34
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (Nonresidential Maintenance – restricted)

  • The test consists of 60 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
2
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
3
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
3
NEC 400-427, 455-480 – Electrical Equipment
3
430-450 – Motors, HVAC, Generators & Transformers
4
NEC 500-516 – Hazardous Locations
1
NEC 517-590 – Special Occupancies
3
NEC 600-695 Special Equipment
2
NEC 700-702 Emergency & Standby Systems
1
NEC 705-780 Special Conditions
2
NEC 800-830 Communication Systems
1
General Trade Knowledge & Theory
7
Total Questions
40
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (Appliance Repair)

  • The test consists of 50 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
4 hours
Subject Area
Number of Questions
NEC 90 – Introduction
2
NEC 100-110 – General Requirements
3
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
3
NEC 300-398 – Wiring Methods
2
NEC 400-427, 455-480 – Electrical Equipment
6
430-450 – Motors, HVAC, Generators & Transformers
2
NEC 705-780 Special Conditions
2
General Trade Knowledge & Theory
7
Total Questions
30
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (Equipment Repair)

  • The test consists of 54 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
6
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
4
NEC 500-516 – Hazardous Locations
1
NEC 517-590 – Special Occupancies
1
NEC 705-780 Special Conditions
2
General Trade Knowledge & Theory
6
Total Questions
34
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Master Electrician (Door, Gate & Similar Systems)

  • The test consists of 54 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
6
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
4
NEC 500-516 – Hazardous Locations
1
NEC 517-590 – Special Occupancies
1
NEC 705-780 Special Conditions
2
General Trade Knowledge & Theory
6
Total Questions
80
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
20
Total
20

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (General)

  • The test consists of 92 questions with 3 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
4 hours
Subject Area
Number of Questions
NEC 90 – Introduction
2
NEC 100-110 – General Requirements
3
NEC 200-225, 280-285 – Wiring & Protection
3
NEC 230 – Services
5
NEC 240 – Overcurrent Protection
6
NEC 250 – Grounding & Bonding
6
NEC 300-398 – Wiring Methods
10
NEC 400-427, 455-480 – Electrical Equipment
3
430-450 – Motors, HVAC, Generators & Transformers
4
NEC 490 – Equipment over 600 Volts
1
NEC 500-516 – Hazardous Locations
3
NEC 517-590 – Special Occupancies
4
NEC 600-695 Special Equipment
3
NEC 700-702 Emergency & Standby Systems
2
NEC 705-780 Special Conditions
1
NEC 800-830 Communication Systems
1
General Trade Knowledge & Theory
8
Total Questions
65
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17
Major Load Calculations (Section 3)
Time allowed for this section
2 hours
Subject Area
Number of Questions
Major Load Calculation
10
Total
10

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (Residential)

  • The test consists of 71 questions with 3 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
3 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
2
NEC 230 – Services
4
NEC 240 – Overcurrent Protection
5
NEC 250 – Grounding & Bonding
5
NEC 300-398 – Wiring Methods
9
NEC 400-427, 455-480 – Electrical Equipment
1
430-450 – Motors, HVAC, Generators & Transformers
3
NEC 500-516 – Hazardous Locations
1
NEC 517-590 – Special Occupancies
1
NEC 600-695 Special Equipment
2
NEC 700-702 Emergency & Standby Systems
1
NEC 705-780 Special Conditions
1
General Trade Knowledge & Theory
6
Total Questions
44
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17
Major Load Calculations (Section 3)
Time allowed for this section
2 hours
Subject Area
Number of Questions
Major Load Calculation
10
Total
10

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (Pump & Irrigation)

  • The test consists of 57 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
3 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 200-225, 280-285 – Wiring & Protection
3
NEC 230 – Services
2
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
7
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
5
NEC 490 – Equipment over 600 Volts
1
NEC 500-516 – Hazardous Locations
1
NEC 600-695 Special Equipment
1
NEC 705-780 Special Conditions
2
General Trade Knowledge & Theory
7
Total Questions
40
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (Domestic Pump)

  • The test consists of 47 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 200-225, 280-285 – Wiring & Protection
2
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
3
NEC 300-398 – Wiring Methods
6
NEC 400-427, 455-480 – Electrical Equipment
1
430-450 – Motors, HVAC, Generators & Transformers
5
NEC 500-516 – Hazardous Locations
1
NEC 705-780 Special Conditions
1
General Trade Knowledge & Theory
6
Total Questions
30
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (Signs)

  • The test consists of 60 questions with 3 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
3 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 230 – Services
3
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
8
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
2
NEC 600-695 Special Equipment
4
General Trade Knowledge & Theory
4
Total Questions
34
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (Limited Energy)

  • The test consists of 61 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
3
NEC 300-398 – Wiring Methods
8
NEC 400-427, 455-480 – Electrical Equipment
3
430-450 – Motors, HVAC, Generators & Transformers
2
NEC 500-516 – Hazardous Locations
3
NEC 600-695 Special Equipment
3
NEC 705-780 Special Conditions
6
NEC 800-830 Communication Systems
3
General Trade Knowledge & Theory
6
Total Questions
44
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (HVAC/R)

  • The test consists of 57 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
2
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
5
NEC 400-427, 455-480 – Electrical Equipment
4
430-450 – Motors, HVAC, Generators & Transformers
7
NEC 490 – Equipment over 600 Volts
1
NEC 500-516 – Hazardous Locations
1
NEC 600-695 Special Equipment
1
NEC 705-780 Special Conditions
2
General Trade Knowledge & Theory
6
Total Questions
40
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (HVAC/R Restricted)

  • The test consists of 47 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
3
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
4
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
4
NEC 500-516 – Hazardous Locations
1
NEC 705-780 Special Conditions
2
General Trade Knowledge & Theory
5
Total Questions
30
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (Nonresidential Maintenance)

  • The test consists of 67 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
3 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 230 – Services
2
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
6
NEC 400-427, 455-480 – Electrical Equipment
4
430-450 – Motors, HVAC, Generators & Transformers
4
NEC 490 – Equipment over 600 Volts
2
NEC 500-516 – Hazardous Locations
3
NEC 517-590 – Special Occupancies
2
NEC 600-695 Special Equipment
3
NEC 700-702 Emergency & Standby Systems
3
NEC 705-780 Special Conditions
2
NEC 800-830 Communication Systems
1
General Trade Knowledge & Theory
6
Total Questions
50
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (Nonresidential Lighting Maintenance & Lighting Retrofit)

  • The test consists of 34 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
1 hour
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 240 – Overcurrent Protection
2
NEC 250 – Grounding & Bonding
3
NEC 400-427, 455-480 – Electrical Equipment
6
NEC 500-516 – Hazardous Locations
1
General Trade Knowledge & Theory
3
Total Questions
17
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (Residential Maintenance)

  • The test consists of 47 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
2
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
3
NEC 300-398 – Wiring Methods
3
NEC 400-427, 455-480 – Electrical Equipment
3
430-450 – Motors, HVAC, Generators & Transformers
3
NEC 600-695 Special Equipment
2
NEC 700-702 Emergency & Standby Systems
2
NEC 705-780 Special Conditions
1
General Trade Knowledge & Theory
5
Total Questions
30
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (Nonresidential Maintenance – restricted)

  • The test consists of 47 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
3
NEC 300-398 – Wiring Methods
2
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
3
NEC 500-516 – Hazardous Locations
1
NEC 517-590 – Special Occupancies
3
NEC 600-695 Special Equipment
1
NEC 700-702 Emergency & Standby Systems
1
NEC 705-780 Special Conditions
1
NEC 800-830 Communication Systems
1
General Trade Knowledge & Theory
5
Total Questions
30
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (Appliance Repair)

  • The test consists of 41 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
4 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
3
NEC 300-398 – Wiring Methods
2
NEC 400-427, 455-480 – Electrical Equipment
5
430-450 – Motors, HVAC, Generators & Transformers
2
NEC 705-780 Special Conditions
2
General Trade Knowledge & Theory
4
Total Questions
24
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (Equipment Repair)

  • The test consists of 47 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
5
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
4
NEC 500-516 – Hazardous Locations
1
NEC 517-590 – Special Occupancies
1
NEC 705-780 Special Conditions
1
General Trade Knowledge & Theory
5
Total Questions
30
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (Door, Gate & Similar Systems)

  • The test consists of 47 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
5
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
4
NEC 500-516 – Hazardous Locations
1
NEC 517-590 – Special Occupancies
1
NEC 705-780 Special Conditions
1
General Trade Knowledge & Theory
5
Total Questions
30
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrical Administrator (Telecommunications)

  • The test consists of 47 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
2
NEC 100-110 – General Requirements
3
NEC 250 – Grounding & Bonding
3
NEC 300-398 – Wiring Methods
3
NEC 500-516 – Hazardous Locations
1
NEC 705-780 Special Conditions
4
General Trade Knowledge & Theory
6
Total Questions
30
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (General)

  • The test consists of 77 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
3 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
3
NEC 200-225, 280-285 – Wiring & Protection
3
NEC 230 – Services
4
NEC 240 – Overcurrent Protection
6
NEC 250 – Grounding & Bonding
6
NEC 300-398 – Wiring Methods
10
NEC 400-427, 455-480 – Electrical Equipment
3
430-450 – Motors, HVAC, Generators & Transformers
3
NEC 490 – Equipment over 600 Volts
1
NEC 500-516 – Hazardous Locations
2
NEC 517-590 – Special Occupancies
4
NEC 600-695 Special Equipment
3
NEC 700-702 Emergency & Standby Systems
2
NEC 705-780 Special Conditions
1
NEC 800-830 Communication Systems
1
General Trade Knowledge & Theory
7
Total Questions
60
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (Residential)

  • The test consists of 57 questions with 3 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
2
NEC 230 – Services
3
NEC 240 – Overcurrent Protection
5
NEC 250 – Grounding & Bonding
5
NEC 300-398 – Wiring Methods
7
NEC 400-427, 455-480 – Electrical Equipment
1
430-450 – Motors, HVAC, Generators & Transformers
3
NEC 500-516 – Hazardous Locations
1
NEC 517-590 – Special Occupancies
1
NEC 600-695 Special Equipment
1
NEC 700-702 Emergency & Standby Systems
1
NEC 705-780 Special Conditions
1
General Trade Knowledge & Theory
6
Total Questions
40
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (Pump & Irrigation)

  • The test consists of 51 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 200-225, 280-285 – Wiring & Protection
3
NEC 230 – Services
2
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
5
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
4
NEC 490 – Equipment over 600 Volts
1
NEC 500-516 – Hazardous Locations
1
NEC 600-695 Special Equipment
1
NEC 705-780 Special Conditions
2
General Trade Knowledge & Theory
4
Total Questions
34
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (Domestic Pump)

  • The test consists of 37 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
1 hour
Subject Area
Number of Questions
NEC 100-110 – General Requirements
1
NEC 200-225, 280-285 – Wiring & Protection
2
NEC 240 – Overcurrent Protection
2
NEC 250 – Grounding & Bonding
2
NEC 300-398 – Wiring Methods
3
NEC 400-427, 455-480 – Electrical Equipment
1
430-450 – Motors, HVAC, Generators & Transformers
3
NEC 500-516 – Hazardous Locations
1
NEC 705-780 Special Conditions
1
General Trade Knowledge & Theory
4
Total Questions
20
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (Signs)

  • The test consists of 47 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 230 – Services
3
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
5
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
2
NEC 600-695 Special Equipment
4
General Trade Knowledge & Theory
4
Total Questions
30
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (Limited Energy)

  • The test consists of 51 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
3
NEC 300-398 – Wiring Methods
5
NEC 400-427, 455-480 – Electrical Equipment
3
430-450 – Motors, HVAC, Generators & Transformers
1
NEC 500-516 – Hazardous Locations
2
NEC 600-695 Special Equipment
1
NEC 705-780 Special Conditions
6
NEC 800-830 Communication Systems
3
General Trade Knowledge & Theory
3
Total Questions
34
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (HVAC/R)

  • The test consists of 51 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
2
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
4
NEC 400-427, 455-480 – Electrical Equipment
4
430-450 – Motors, HVAC, Generators & Transformers
4
NEC 490 – Equipment over 600 Volts
1
NEC 500-516 – Hazardous Locations
1
NEC 600-695 Special Equipment
1
NEC 705-780 Special Conditions
2
General Trade Knowledge & Theory
4
Total Questions
34
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (HVAC/R Restricted)

  • The test consists of 54 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
1 hour
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 240 – Overcurrent Protection
2
NEC 250 – Grounding & Bonding
2
NEC 300-398 – Wiring Methods
3
NEC 400-427, 455-480 – Electrical Equipment
1
430-450 – Motors, HVAC, Generators & Transformers
3
NEC 500-516 – Hazardous Locations
1
NEC 705-780 Special Conditions
2
General Trade Knowledge & Theory
4
Total Questions
20
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (Nonresidential Maintenance)

  • The test consists of 57 questions with 3 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
2
NEC 230 – Services
3
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
5
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
2
NEC 490 – Equipment over 600 Volts
2
NEC 500-516 – Hazardous Locations
1
NEC 517-590 – Special Occupancies
1
NEC 600-695 Special Equipment
3
NEC 700-702 Emergency & Standby Systems
1
NEC 705-780 Special Conditions
2
NEC 800-830 Communication Systems
1
General Trade Knowledge & Theory
5
Total Questions
40
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (Nonresidential Lighting Maintenance & Lighting Retrofit)

  • The test consists of 34 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
1 hour
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 240 – Overcurrent Protection
2
NEC 250 – Grounding & Bonding
3
NEC 400-427, 455-480 – Electrical Equipment
6
NEC 500-516 – Hazardous Locations
1
General Trade Knowledge & Theory
3
Total Questions
17
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (Residential Maintenance)

  • The test consists of 37 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
1 hour
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 200-225, 280-285 – Wiring & Protection
2
NEC 240 – Overcurrent Protection
2
NEC 250 – Grounding & Bonding
2
NEC 300-398 – Wiring Methods
2
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
1
NEC 600-695 Special Equipment
2
NEC 700-702 Emergency & Standby Systems
2
General Trade Knowledge & Theory
3
Total Questions
37
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (Nonresidential Maintenance – restricted)

  • The test consists of 41 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 200-225, 280-285 – Wiring & Protection
3
NEC 240 – Overcurrent Protection
3
NEC 250 – Grounding & Bonding
2
NEC 300-398 – Wiring Methods
2
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
1
NEC 500-516 – Hazardous Locations
1
NEC 517-590 – Special Occupancies
1
NEC 600-695 Special Equipment
2
NEC 700-702 Emergency & Standby Systems
2
General Trade Knowledge & Theory
3
Total Questions
24
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (Appliance Repair)

  • The test consists of 37 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
1 hour
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
2
NEC 240 – Overcurrent Protection
2
NEC 250 – Grounding & Bonding
2
NEC 300-398 – Wiring Methods
2
NEC 400-427, 455-480 – Electrical Equipment
4
430-450 – Motors, HVAC, Generators & Transformers
2
NEC 705-780 Special Conditions
1
General Trade Knowledge & Theory
4
Total Questions
20
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (Equipment Repair)

  • The test consists of 47 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
1 hour
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
5
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
4
NEC 500-516 – Hazardous Locations
1
NEC 517-590 – Special Occupancies
1
NEC 705-780 Special Conditions
1
General Trade Knowledge & Theory
5
Total Questions
30
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
Washington Electrician (Door, Gate & Similar Systems)

  • The test consists of 47 questions with 2 different sections to complete
  • You must score at least 70% to pass
NEC & Theory (Section 1)
Time allowed for this section
2 hours
Subject Area
Number of Questions
NEC 90 – Introduction
1
NEC 100-110 – General Requirements
1
NEC 200-225, 280-285 – Wiring & Protection
1
NEC 240 – Overcurrent Protection
4
NEC 250 – Grounding & Bonding
4
NEC 300-398 – Wiring Methods
5
NEC 400-427, 455-480 – Electrical Equipment
2
430-450 – Motors, HVAC, Generators & Transformers
4
NEC 500-516 – Hazardous Locations
1
NEC 517-590 – Special Occupancies
1
NEC 705-780 Special Conditions
1
General Trade Knowledge & Theory
5
Total Questions
30
WA Codes (Section 2)
Time allowed for this section
1 hour
Subject Area
Number of Questions
Washington Laws & Rules (RCW & WAC)
17
Total
17

The reference materials listed below were used to create the questions for this exam and are allowed in the examination center.

National Electrical Code, 2014 Edition
Revised Code of Washington (RCW) 19.28
Washington Administrative Code (WAC) 296-46B
[/vc_column] [vc_column width=”1/2″]

BUY BOOKS HERE!

National Electrical Code, 2014 Edition


___________________

Electrical Revised Code of Washington (RCW) 19.28

CLICK HERE For a free download.

Washington Administrative Code (WAC)

CLICK HERE For a free download.
[/vc_column] [/vc_row]
__

Do you want live instruction? Click here for dates and locations of live seminars!


[vc_row] [vc_column width=”1/3″]

Continuing Education

Continuing Education

[/vc_column] [vc_column width=”1/3″]

Exam Prep

Exam Preparation

[/vc_column] [vc_column width=”1/3″]

Practice Exams

Practice Exams

[/vc_column] [/vc_row]